Please refer to Rivian CPX-900 User Manual for additional details and instructions.
Use In Vehicle Test to perform Battery Tests on in-vehicle batteries using test parameters determined by vehicle VIN or through manual entry of battery parameters. A System Test for Starter and Charging testing is also available for non-Rivian vehicles.
NOTE: The testing process uses proprietary 12V Safety Power Capacity™ (SPC™) diagnostic technology to determine the battery State of Charge and Reserve Capacity. This additional analysis can take up to 60 seconds to complete.
NOTE: The tester VIN scan will recognize a RIVIAN
vehicle VIN. If VIN-scan does not auto-recognize
a Rivian vehicle, manually enter the VIN and Year/Make/
Model info. and continue to Step 2.
If the screen at right appears, selecting ‘Yes’ will continue
to Step 3. Selecting ‘No’, will advance the test to Chapter
3, ‘In Vehicle Test Non-RIVIAN vehicles’.
When VIN Entry is enabled (See Chapter 6 – Settings),
an In Vehicle Test will always associate the in-vehicle
battery to the VIN of the vehicle being tested